BenQ W1500 user manual System Setup menu, Advanced Setup menu

System Setup menu

Function	Description
Language	Sets the language for the On-Screen Display (OSD) menus. See "Using the
	menus" on page 31 for details.
Splash Screen	Allows you to select which logo screen will display during projector start-up.
	You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position	The projector can be installed on a ceiling or behind a screen, or with one or
	more mirrors. See "Choosing a location" on page 15 for details.
Auto Off	Prevents unnecessary projection when no signal is detected for a long time. See
	"Setting Auto Off" on page 59 for details.
Sleep Timer	Sets the auto-shutdown timer. The timer can be set to a value between 30
	minutes and 3 hours.
	Menu Display Time
	Sets the length of time the OSD will remain active after your last key press.
Menu Settings	Menu Position
	Sets the On-Screen Display (OSD) menu position.
	Blank Reminder Message
	Sets whether the blank reminder message is displayed by the projector while
	the image is hidden.
Input Source	Selects an input source to be projected. See "Selecting an input source" on
	page 30 for details.
Source Rename	Renames the source to your desired name. See "Selecting an input source" on
	page 30 for details.
	Sets whether the projector searches automatically for input sources. If the
Auto Source Search	source scan is On, the projector will scan for input sources until it acquires a
	signal. If the function is not activated, the projector selects the last used input
	source.

Advanced Setup menu

Function	Description
	Reset Lamp Timer
	Once the lamp is renewed, select Reset to return the lamp timer to "0". See
Lamp Settings	"Resetting the lamp timer" on page 62 for details.
	Equivalent Lamp Hour
	Shows the lamp hour information. See "Getting to know the lamp hour" on
	page 59 for details.
	HDMI Format
	Selects an input source type for the HDMI signal. You can also manually select
	the source type. The different source types carry different standards for the
	brightness level.
HDMI Settings	HDMI Format is only available when the HDMI signal is selected.
	CEC
	Enables or disables the CEC function. When you connect an HDMI CEC-
	compatible device to your projector with an HDMI cable, turning on the HDMI
	CEC compatible device automatically turns on the projector, while turning off
	the projector automatically turns off the HDMI CEC compatible device.
	Selects a baud rate that is identical with your computer’s so that you can
Baud Rate	connect the projector using a suitable RS-232 cable and update or download
	the projector’s firmware. This function is intended for qualified service
	personnel.

Important safety instructions 55