Mitsubishi Electronics XD211U user manual Basic connections, Projector + AV device

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.

Important:

•Make sure that the connected device is turned off before starting connection.

•Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.

•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.

•See the owner’s guide of each device for details about its connections.

Projector + AV device

S-VIDEO IN

(option)

VIDEO (option)

(option)

AUDIO IN to audio output (L)

to audio output (R) to Video output

VCR, etc.

to S-video output

Important:

•Match the colors of the video and audio plugs on the Audio cable with those of the terminals.

•Speaker output is mono.

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this projector, use the COMPUTER-IN terminal.

Audio cable (option)

DVD player or HDTV decoder

to audio output

COMPUTER IN

Important:

•The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

•The terminal’s names vary depending on the connected devices.

•Image may not be projected correctly with some DVD players.

•When connecting a HDTV decoder having RGB output terminals, set Signal Type to RGB in the Setting menu.

•Speaker output is mono.

•AUDIO OUT doesn't work at stand-by mode.

•When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.

EN-10