Mitsubishi Electronics XD211U Setting menu, Language menu, Factory Default menu, options, EN-18

Menu operation (continued)

5. Setting menu

Menu option	Setting	Feature description
Menu Position	5 options	Choose the menu location on the display screen.
	4 options	Adjust the picture to match the orientation of the projector: upright or
Mounting		upside-down, in front of or behind the screen. Invert or reverse the
		image accordingly.
Logo	On, Off	Choose to display the logo or not.
Signal Type	RGB	For VGA signal
	YCbCr/YPbPr	For Component I,P signal
		Display the lamp's elapsed operating time (in hours).
Lamp Time		• The displayed lamp time is based on low lamp mode setting.
		(The lamp lifetime is 3000 hours.)
Lamp Time Reset	Yes, No	Reset the lamp time to 0 hours.
		When this mode is set to Yes, the lamp is automatically lit when the
		power cord is plugged in the wall outlet. Select Yes when you set the
Auto Power On	Yes, No	projector at the ceiling.
		• When the lamp is off, the projector is in standby. Use the remote
		control to turn on the lamp.
Auto Power Off	No, 15-60 Min.	Selects a desired timer setting until the projector enters the standby
		mode when there is no signal input from the source.
Auto Source	Yes, No	Automatically scan the input source.
	Standard	Select this setting when you want to view images in a well-lit room.
		Select this setting when you want to view images at a moderate light
		intensity. The operating sound is consequently reduced, and the lamp
Lamp Mode		lifetime becomes longer.
	Low	• When this mode is switched, projected images may flicker.
		• If this mode is frequently switched, the lamp may be deteriorated.
		• The default setting is Standard when shipment.
		• The Lamp Mode cannot be switched for about 1 minute after the
		lamp is on.
OSD Timeout	5 - 60 sec	Duration OSD menu stays active (at idle state by second).
6. Language menu
Menu option	Setting	Feature description

Language 11 languages Select the language used by the on-screen menu.

7. Factory Default menu

Menu option	Setting	Feature description
Factory Default	Yes, No	Restore all menu settings to factory default settings.

EN-18