5. TV Menu Settings 43
Inputs Menu Options
Name
Cable Box,
Camcorder,
DVD, DVD2,
DVR, Game,
HD Disc,
Satellite, VCR,
PC,
On/Off
(ANT1and
ANT2only)
Off (HDMIonly)
• AssignorchangenamesofinputsappearingintheInput S election
menu.
• TurnAnt-1 andAnt-2 OnorOff.
• TurnunusedHDMIinputsOff.
• Press tomovebetweeninputs.
• Pres s toselectaname.
• IfyouchangethenameofaninputafterperformingNetCo mmand
“learning,”theIRcodesyou“learned”areerased.
Note:
WhenyoudisconnectanHDMIdevice,theiconremainsintheInput
Selectionmenuuntilyouremoveit.ToremoveanunwantedHDMIicon,
selectOfffortheHDMIinput.
Order
PutfrequentlyusediconsatthestartoftheInput Se lectionmenu.
1. Press tohighlighttheicontomove.
2. Press
ENTER
toconfirmtheselection.
3. Press todragtheicontothedesiredposition.
4. Press
ENTER
tosetthenewposition.
Learn
Y series and 734 serie s only
• Performinitialset-upofNetCommandcontrolofadevice.
• AddorremoveindividualkeysfromNetCommandcontrolofadevice.
Seedetailedinstructionsinchapter6,“NetCommand.”
AVR
Y series and 734 serie s only
SetupNetCommandcontrolofanA/ Vreceiver.Thisset-upallowsyouto:
• OperatetheA/Vreceiver’spowerandvolumefunctionswiththeT V’sremotecontrol.
• MaketheA/Vreceiverswitchautomaticallytothecorrec taudioinputwhenyouselecta
deviceintheTV’sInput Selectionmenu.
Seedetailedinstructionsinchapter6,“NetCommand.”
Inputs Menu
Change input names using the Input s > Name menu.
Note:
• NetCommandIRcontrolofhome-theaterdevicesis
availableonYseriesand734seriesmodelsonly.
• WhenyouchangeaninputnameintheNamemenu
andthenexittheNamemenu:
 Thenameischanged
TheiconintheInput Selectionmenuischanged
 Settingsarechangedtothedefaultsforthe
newdevicetype.
 OnmodelsofferingNetCommandcontrol,all
“learning”fortheinputisalsoerased.