54 6. NetCommand
Before You Begin
1. ConnectyourA/VdevicestotheTVandconne ct
yourA/VreceivertotheTVandtheDVDplayer.
Seechapter2,“TVConnections,”forsuggestions.
2. Openthe Inputs > AVRmenu.
Note: ThetermsInput 1–Input 4usedintheAVR
screenaretemporaryplaceholdernames.They
refertotheA/VreceiverinputsforwhichtheTV
canlearnIRcodes.
Setup 1: Automatic A/V Receiver Switching to Its TV
Audio Input
MostdevicesaresetupliketheVCRinthisexample,in
whichanalogaudiofromthedeviceissentthroughthe
TV.
Usethissetupfor:
• Sourcesprovidingonlyanalogstereooutput,such
asaVCR
• Audiofrom
ANT 1
and
ANT 2
57
"/5
"/5
BVEJPWJEFP
*ODPNJOH
$PBYJBM
$BCMF
"73FDFJWFS
%7%BVEJP
JOQVU
57BVEJP
JOQVU
57BVEJP
PVU
EJHJUBMPS
BOBMPHBVEJP
GSPN57
BOBMPHBVEJP
WJEFP
WJEFP
BOBMPHBVEJP
7$3XJUI
"OBMPH
"VEJP
Setup 1: A/V receiver audio from the TV’s digita l or
analog audio output (
DIGITAL AUDIO OUT
or
AVR AUDIO
OUTPUT
)
1. UnderLearn/Name,press tohighlight
theareanexttoInput 1.
Inthisexample,theIRcodefortheA/Vreceiver’s
TV Audio
inputwillbe“learned”asInput 1.
2. Press
ENTER
ontheTV’sremotecontrol.
3. WhilethetextInput1isflashing,pressandholdthe
TV INPUT
keyontheA/V receiver’sremotecontrol.
4. WhenacheckappearsnexttoInput 1,releasethe
TV INPUT
key.
Setup to Control Automatic Switching of A/V Receiver Audio Inputs
Twodifferentsetupsaredescribedhere:
Setup 1:AutomaticA/VReceiverSwitchingtoT V
AudioInput
Setup 2:AutomaticA/ VReceiverSwitchingfora
devicesendingaudiodirectlytotheA/Vrec eiver
• AudioAvailablefromT Vonly:UseSetup1.
Audiofrom
ANT 1
and
ANT 2
mustbesenttothe
A/VreceiverfromtheTV ’sDIGITAL AUDIO OUTor
analog
AVR AUDIO OUTPUT
.
UseSetup1tomaketheA/Vreceiverswitchto
itsdesignatedTVaudioinputwhenviewingthese
sources.
• HDMIDigitalStereoA udio:UseSetup1
DigitalstereoaudiofromanHDMIconnection
isavailablebothindigitalformat(fromtheTV’s
DIGITAL AUDIO OUT)jackandinanalogformat
(fromtheTV’s
AVR AUDIO OUTPUT
jack).
• AnalogStereoAudio:Us eSetup1.
Audiofromsourceswithonlyanalogstereooutput
(suchasaVCR)canbesenteitherdirectlytothe
A/VreceiverorthroughtotheT Vandthenontothe
A/Vreceiver.
Mitsubishirecommendsyousendaudiothrough
theTVasshownintheexample.Setup1causes
theA/Vreceivertoswitchtoitsinputdesignatedfor
TVaudio.
IfyouhaveadigitalA/Vreceiver,theTVmakesthe
audioavailablebyconvertinganalogaudiotoa
digitaloutput.
• DigitalSurroun dSound:UseSetup2.
Adevicecansenddigitalsurroundsoundsuchas
DolbyDigitalorDTSdirectlytotheA/Vrecei ver,
bypassingtheTVentirely.Thedevicemightbe
aDVDplayer,cablebox,orsatellitereceiver,and
couldhaveHDMIoutput.ADVDplayerisusedin
thisexample.
Yoursetupmayincludeadditionaldeviceswith
digitalsurroundsoundconnecteddirectlytothe
A/Vreceiver.ThesedevicesmightbeaDVDplayer
plusacableboxorsatellitereceiver.
Set Up NetCommand Control of an
A/V Receiver, continued
IMP ORTA NT
To hear audio sent from the TV to t he A/V receiver,
you must have:
•
physically connec ted the TV to the A/V r eceiver
•
selected the A/ V receiver for audio.
Press
AUDIO, then to show the Spe akers option, then
to select the A/ V Receiver.
• “
learned” the IR code s for the A/V receiver
inputs
• chosenthecorrecti nputintheNetComma nd
A/V Receiver Lea rn screen