47
6NetCommand

About NetCommand

• NetCommandhome-theatercontrolisavailableon
thefollowingmodels:
YseriesWD-Y577,WD-Y657
734seriesWD-57734,WD-65734,WD-73734.
Thischapterappliesonlytothesemodels.
• NetCommandsetupisoptional.
• YoucanperformNetCommandsetupwhentheTV
firstrecognizesadeviceduringAutoInputSensing
oratanyconvenienttimeafterward.
• NetCommandoperatesbysendingremotecontrol
signalsfromtheTVtoyourotherdevicesviatheIR
emitters,tellingthedevicestoplay,record,change
inputs,adjustvolume,changechannelsandmany
morefunctions.Allthisisaccomplishedwiththe
TV’sremotecontrolandtheslideswitchleftinthe
TV
position.
• TheIR“Learning”featureofNetCommandallows
theTVtolearntheremotecontrolsignalsforyour
A/Vdevices.
• YoucanchoosethelevelofNetCommandcontrol
foryourhometheater.
Standard Set up. Performastandardsetupif
youwantNetCommandtocontrolonlyafew
devices,suchastheTV,aplaybackdevice(like
aDVDplayer),andacablebox.Withthissetup,
youcanusetheTV’sremotecontroltooperate
thesedevices.
A/V Receive r Setup. PerformA/Vreceiver
setupifyouwantNetCommandto:
 ControlasurroundsoundA/Vre ceiver.
 Automaticallychangeaudioinputselections
onanA/Vreceiverwhenyouchangeinpu ts
ontheTV.
Important Note on NetCommand
Be sure to connect th e IR emitter cable to the
TV and properly p lace the emitters so that
Netcommand can cont rol your devices. See the
explanation on the fo llowing page.