Menu operation (continued) |
|
|
| |
1 IMAGE |
|
|
|
|
CONTRAST | Use to adjust the image contrast. The contrast becomes |
| opt. |
|
| higher as the value increases. |
|
| XGA60 |
BRIGHTNESS | Use to adjust the image brightness. The image becomes | IMAGE |
| |
| brighter as the value increases. |
| CONTRAST | 0 |
WHITE ENHANCE | Use to adjust the white level of the projected image. |
|
|
|
|
|
| BRIGHTNESS | 0 |
COLOR TEMP | Use to adjust the color temperature. See page 18. |
|
|
|
|
|
| WHITE ENHANCE | 10 |
COLOR | Use to adjust the color intensity of the image. |
|
|
|
|
|
| COLOR TEMP. | STANDARD |
TINT | Use to adjust the color balance of the image. The color |
|
|
|
|
|
| COLOR | 0 |
| balance shifts to green as the value increases and shifts |
|
|
|
|
|
| TINT | 0 |
| to purple as the value decreases. (Available only when |
|
|
|
| VIDEO or |
| SHARPNESS | 0 |
| • When the TV50 (PAL, SECAM) signal is input, TINT |
| GAMMA MODE | STANDARD |
| can’t be adjusted. |
|
|
|
SHARPNESS | Use to adjust the image sharpness. The image becomes sharp as the value increases. (Not available | |||
| with certain signals.) |
|
|
|
GAMMA MODE | When AUTO is selected, the appropriate gamma mode is automatically selected depending on the | |||
| input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STAN- | |||
| DARD for sport scenes and video sources. Select THEATER for film sources. |
| ||
2 INSTALLATION |
|
|
|
|
AUTO POWER ON | When ON is chosen, the lamp is automatically lit when |
| opt. |
|
| the power cord is plugged in the wall outlet. Choose ON |
|
| XGA60 |
| when using the projector mounted on the ceiling. | INSTALLATION |
| |
| • The projector is in the |
| AUTO POWER ON | OFF |
| is off. Use the remote control to turn on the lamp. |
|
|
|
|
|
| AUTO POWER OFF | OFF |
AUTO POWER OFF | Use to set the time elapsed before the projector enters |
|
|
|
|
| ON |
|
|
|
|
| SPLASH SCREEN | ON |
| the |
|
|
|
|
|
| BACK COLOR | BLUE |
| source. |
|
|
|
|
|
| LAMP MODE | STANDARD |
SPLASH SCREEN | Choose ON to display the splash screen when the power |
|
|
|
| is turned on. |
| IMAGE REVERSE | OFF |
BACK COLOR | Use to select the background from among BLUE and |
| LAMP HOURS | 0 |
| BLACK, which will be displayed when there is no signal |
|
|
|
| input from the source. |
|
|
|
LAMP MODE | Use to change the brightness of the lamp. When LOW is chosen, the lamp brightness is kept low and | |||
| the projector operating noise is reduced, resulting in a longer lamp replacement interval. | |||
| • When the lamp mode is switched, the projected image may flicker. This is not a product malfunc- |
| tion. |
| • Do not change the setting of LAMP MODE frequently. |
| • When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW |
| about one minute after turn on. |
IMAGE REVERSE | Use to reverse the projected image. Select MIRROR for rear projection with the |
| projector. Select MIRROR INVERT for front projection with the |
LAMP HOURS | The duration of illumination of a lamp converted in the Low mode is displayed. |
