Installation Instructions

INSTALLING THE REFRIGERATOR

REFRIGERATOR LOCATION

Do not install the refrigerator where the temperature will go below 60°F (16°C) because it will not run often enough to maintain proper temperatures.

Do not install the refrigerator where the temperature will go above 100°F (37°C) because it will not perform properly.

Install it on a floor strong enough to support it fully loaded.

CLEARANCES

Allow the following clearances for ease of installation, proper air circulation and plumbing and electrical connections.

 

Standard Depth

 

Models

Sides

1/8(3 mm)

Top

1(25 mm)

Back

1(25 mm)

1PLUG IN THE REFRIGERATOR

On models with an icemaker, before plugging in the refrigerator, make sure the icemaker power switch is set to the O (off) position.

See the grounding information attached to the power cord.

2PUT THE REFRIGERATOR IN PLACE

Move the refrigerator to its final location.

3LEVEL THE REFRIGERATOR

Adjustable legs at the front corners of the refrigerator should be set so the refrigerator is firmly positioned on the floor, and the front is raised just enough that the door closes easily when opened about halfway.

To adjust the leveling legs, turn the legs clockwise to raise the refrigerator, counterclockwise to lower it.

10

4

REMOVE THE FRESH FOOD

DOOR HANDLE

(For placement in the installation location or reversal of the handles – on some models)

Stainless steel (on some models):

AREMOVING

THE DOOR

 

HANDLE: Loosen

 

the set screws

Badge

with the 3/32

A

Allen wrench

 

and remove

 

the handle.

B

NOTE: For

 

Double Door

Mounting

models follow

Fasteners

the same

(appearance may vary)

procedure on

 

the opposite door.

 

Plastic handle (on some models):

AREMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners.

REVERSING THE

 

DOOR HANDLE

 

(on some

B

models):

 

Remove

Badge

the handle

 

mounting

A

fasteners with

a 3/16Allen

 

wrench and

Mounting

transfer

Fasteners

the handle

 

mounting

(appearance may vary)

fasteners to

 

the right side.

 

Remove the logo badge.

Remove and transfer the plug button to the left side of the fresh food door. NOTE: Use a flat plastic edge to prevent damaging the door. Remove any adhesive on the door with a mild detergent. Remove the paper covering on the adhesive backing on

the logo badge prior to carefully attaching the badge to the door.

Page 10
Image 10
Moffat 22, 20 Refrigerator Location, Clearances, Plug in the Refrigerator, PUT the Refrigerator in Place

20, 22 specifications

Moffat 22,20 is a notable model in the realm of commercial kitchen equipment, known for its high performance and efficiency. This versatile oven is designed to meet the demanding needs of restaurants, catering services, and other food establishments, making it a reliable choice for professionals in the culinary industry.

One of the main features of the Moffat 22,20 is its advanced cooking technology. It employs a combination of convection and combination cooking methods, allowing users to achieve optimal cooking results. The convection feature ensures that heat circulates evenly throughout the oven, promoting consistent cooking and browning of food items. Meanwhile, the combination cooking technology utilizes both steam and dry heat, enabling chefs to prepare a wide variety of dishes with precision and control.

The Moffat 22,20 is equipped with an intuitive digital control panel, which allows for precise temperature settings and timer adjustments. This user-friendly interface ensures that chefs can easily navigate through different cooking modes and settings, streamlining the cooking process. Additionally, the oven's programmable functions enable operators to save favorite recipes and cooking parameters, enhancing efficiency in a busy kitchen environment.

Another significant characteristic of the Moffat 22,20 is its robust construction. Crafted from high-quality stainless steel, this oven is built to withstand the rigors of a commercial kitchen while maintaining a sleek and professional appearance. The durable materials not only enhance the oven's longevity but also make it easy to clean and maintain, which is essential in a fast-paced culinary setting.

The Moffat 22,20 boasts an impressive cooking capacity, allowing chefs to prepare large quantities of food simultaneously. Its spacious interior accommodates a variety of cooking trays and pans, making it ideal for batch cooking and large-scale meal preparation. This feature is particularly beneficial for catering services that require the quick preparation of meals for events.

In terms of energy efficiency, the Moffat 22,20 is designed to minimize energy consumption without compromising on performance. This makes it an environmentally friendly option for kitchens looking to reduce their carbon footprint while still achieving exceptional cooking results.

In summary, the Moffat 22,20 is a high-performance oven that combines advanced cooking technologies with robust construction and user-friendly features. Its convection and combination cooking capabilities, intuitive digital controls, ample cooking capacity, and energy efficiency make it a top choice for culinary professionals seeking reliability and excellence in their kitchen equipment.