Installation Instructions
REVERSING THE DOOR SWING (cont.)
2REMOVE FREEZER DOOR
ATape the door shut with masking tape.
BRemove the hinge pin from the hinge bracket. This will be used again with the new hinge bracket for the other side.
CRemove the tape and tilt the door away from the cabinet. Lift the door off the bottom hinge pin.
DRemove the button plug from the left side of the door. Remove the door thimble from the right side of the door. Install the door thimble into the hole on the left and the button plug into the hole on the right.
ESet the door on a
3TRANSFER CENTER HINGE BRACKET
AUsing a 5/16″ socket ratchet/driver, remove the bolts securing the center hinge bracket to the cabinet.
3TRANSFER CENTER HINGE BRACKET (cont.)
BTransfer the plug button and screw hole cover in the hinge holes on the left side to the right side.
CInstall the new center hinge bracket from the kit on the left side.
4REMOVE BOTTOM HINGE AND LEVELING LEG
AUsing a 1/2″ socket ratchet/driver, remove
the nut and hinge pin from the hinge bracket with leveling leg. Using a 5/16″ socket ratchet/ driver, remove the screws from the bottom hinge bracket. These will be reinstalled on the other side.
Bottom hinge bracket
BUsing a 5/16″ socket ratchet/driver, remove the screws from the leveling leg bracket on the other side. These will be reinstalled on the opposite side.
Leveling leg bracket
14