IMPORTANT!

Two people will be required to carry out the lifting procedure.

WARNING!

Do not attempt to lift this appliance by the handle(s).

Each person should squat either side of the appliance.

Tilt the appliance so that your hands can support the underside of the appliance.

Keeping your back straight, raise the appliance to the correct height by straightening at the knees.

Rest the rear underside of the appliance on the cabinet floor while your hands support the front.

The appliance can be pushed fully into the cabinet. Take care to avoid fouling the mains lead.

Ensure the appliance is central and level.

Do not remove spacers fitted behind fixing holes.

When the appliance is fully housed screw the stability screws (supplied with the appliance) into the side of the cabinet taking care not to distort the side trims. It is advisable to turn each screw alternatively to avoid damaging the trims.

Fixing points for stability

screws

36

Switch on the appliance then refer to the operating instructions.

Page 36
Image 36
Moffat MDB900 Do not attempt to lift this appliance by the handles, Each person should squat either side of the appliance