Monessen Hearth ODGR500, ODGR400 manual Operating Instructions, Log Installation, First Firing

ODGR Series Outdoor Gas Fireplace

Operating Instructions

Log Installation	Right Cross
1. Remove logs from the packaging.	Log
As with all plastic, these bags	Left Cross
are not toys and should always	Log
be kept away from children and
infants.
2. Place left rear log on rear log support.	Right Rear
Ensure that log is firmly positioned and
there is no side-to-side movement. (Figs.	Log
13 & 14)
3. Carefully place Ember Log between
grate and burner. (Figs. 13 & 14)	Left Rear
4. Place the front of right rear log on the
	Log
burner and the back of the log on the	Ember
rear log support.
	Log

5. Place the top logs onto the locator notches. Ensure the logs are secure. (Fig. 13 & 14)

			LG317
	Fig. 13	ODGR400 log placement.
	Left Cross		First Firing
	Log
	Middle Cross Log		Upon completing the gas line connection, a small
		Right Cross	amount of air will be trapped in the line. When
			first lighting the unit with pilot light, it will take a
		Log
			few minutes to purge the trapped air. Once purg-
			ing is complete, the pilot and burner will light and
			operate as indicated in the instruction manual.
			Subsequent lightings of the appliance will not
			require purging.
		Right Rear	When lit for the first time, the appliance will emit
		Log
Left Rear			a slight odor for an hour or two. This is due to
Log			paint and lubricants used in the manufacturing
		Log Right process. After each lighting, vapor may con-
		Ember	dense and fog the glass; this moisture disap-
			pears in a few minutes of burning.
	Log Left
	Ember
		Grate
LG318
Fig. 14	ODGR500 log placement.
10			92D0001