Morphy Richards 730 manual Operating controls, Operating the processor, Spatula, Cord storage

Storage

3Place the processor bowl

Spatula

Slide the spatula into the slot provided on the side of the processor body .

Cord storage

The mains lead can be stored by feeding it into the opening at the back of the processor body.

Operating controls

The processor and blender control dials have settings as follows:

Off / 3 speeds

Pulse

Off

1

2

PULSE3

onto the processor body , (there is no need to turn the bowl).

4When fitted correctly, the handle will be to the right of the assembly, and the ridge on the base of the bowl will fit into the slot at the back of the processor body.

5Fit the spindle onto the motor

shaft and the appropriate attachments onto

the spindle. Refer to following section ‘Fitting and using the tools’.

6	Holding the
	processor lid	by
	the feed tube, fit
	the lid by rotating
	anti-clockwise.
7	Ensure that the lid
	tab has ‘clicked’

The speed can be adjusted whilst the processor or blender is in use.

Using the pulse button allows greater control over the texture of the food produced. It is only intended to be used for short ‘bursts’ of processing or blending.

Operating the processor

Setting up

1Ensure the processor is

unplugged from the mains

2Fit the safety

cover into the processor body

and turn anti- clockwise firmly

until it ‘clicks’ into place (the arrows will now be lined up). THE FOOD PROCESSOR WILL NOT OPERATE WITHOUT THE SAFETY COVER IN PLACE.

into place and the

arrows are lined

up.

8 Plug in the

processor and

switch on. If the

processor does

not come on,

check that the

machine cover and

processor lid are

both correctly fitted.

FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING FOOD INTO THE FEEDER TUBE. NEVER FEED BY HAND.

5