Blender
1Remove the processor bowl
and lid.
2Remove the safety
cover . This can only be done once the processor lid has been removed.
3 Place the blender into its location on the processor body, with handle
to the left. Turn
4Place food in blender
5Place the lid
and goblet on the blender.
6 Replace the processor bowl and processor lid. Ensure that the lid tab has clicked into place. The blender will not operate if the processor lid is not ‘clicked’ in place.
7Plug in the processor
8Always operate the blender with the lid in place
9 When blending hot liquids, remove the goblet .
10Never operate the blender with more
than 1500ml of liquid or when empty.
FOR SAFETY, DO
NOT FIT ANY
ATTACHMENTS
INTO THE FOOD
PROCESSOR
BOWL WHEN USING THE BLENDER.
11 TO REMOVE THE |
|
BLENDER, YOU |
|
MUST FIRST |
|
UNLOCK AND |
|
REMOVE THE |
|
PROCESSOR | A |
LID (A). |
|
THEN UNLOCK | B |
AND REMOVE THE |
|
BLENDER (B) BY |
|
TWISTING |
|
CLOCKWISE. |
|
Cleaning the processor and attachments
1Switch the processor off and unplug from the electrical socket
2All accessories and processor tools can be washed in hot soapy water except for the processor body .
WARNING: EXTREME CARE MUST BE TAKEN WHEN WASHING THE METAL BLADES AS THESE ARE EXTREMELY SHARP.
3The stainless steel blades and citrus press are the only dishwasher safe items.
4Clean the processor body by wiping with a damp cloth. ALWAYS UNPLUG THE PROCESSOR BODY BEFORE CLEANING.
5To clean the blender fill with warm water and washing up liquid, run for 30 seconds on maximum speed and repeat as necessary.
Hints and tips
•The metal blade 23 can be used for chopping meat, fish, vegetables, cheese etc, setting the speed to maximum.
•For finer chopping, increase the length of time you process.
•For coarser chopping, use the pulse button for a few seconds and monitor food texture
•
•For shredding place food horizontally into the feed tube, for slicing place the food vertically.
•When blending, pour the liquids in first and then add the solid food. Begin blending at the lower speed and increase when needed.
•When slicing carrots, place 2 at a time in the feeder tube to keep upright.
8