Fitting and using the tools
In general, all attachments which are fitted within the processor bowl must be firmly attached to the spindle 
. Always adjust the attachment until you are sure that they are correctly fitted.
Chopping blade 23
1Fit the processor bowl and spindle as detailed previously.
2 Remove the protective cover
20from the metal chopping blade.
3Fit the blade over the spindle and press firmly into
place.
WARNING: USE
EXTREME
CAUTION –
BLADES ARE
SHARP.
ALWAYS
HANDLE THE CHOPPING BLADE BY ITS
CENTRAL PLASTIC SECTION.
4Place the food into the bowl.
5Fit the lid and click into place as detailed in the ‘Setting up’ section.
6Plug in the processor.
7Use the food pusher 
to add food into the processor bowl through the feeder tube.
8 | When the |
| processing is |
| complete, |
| remove the |
| spindle and |
| blade from the |
| bowl before |
| removing the |
| processed food. |
9AFTER CLEANING, ALWAYS REPLACE THE PROTECTIVE COVER 20 ON THE METAL CHOPPING BLADE.
Whisking attachment
1Fit the processor
bowl and spindle as previously detailed.
2 Fit the whisking attachment over the spindle and press firmly into place.
3Add ingredients into the bowl.
4Fit the lid and click into place as detailed in the ‘Setting up’ section.
5Plug in the processor.
6Turn the processor on selecting maximum speed NEVER USE THE WHISK ATTACHMENT FOR DOUGH KNEADING.
Slicing and grating blades
1Place the blade of your choice on the blade holder 
, inserting the longer tab on the side on the blade first.
2Press the other end of the blade until it ‘clicks’ into place.
3Fit the processor bowl and spindle as detailed previously.
4Using the finger holes in the blade holder, fit it over the spindle and press
firmly into place as indicated.
WARNING: USE EXTREME
CAUTION –
BLADES ARE
SHARP.
5 Fit the lid and click into place as detailed in the ‘setting up’ section.
6Plug in the processor.
7Use the food pusher 
to add food into the processor bowl through the feeder tube.
6
