Chapter 3: Device Configuration

Enabling the DHCP Server and Assigning Addresses

The following procedure describes how to enable the local DHCP server residing on the VMM and assign an address range from within MeshManager’s DeviceManager screen.

Procedure 3-1 Enabling the VMM resident DHCP Server

1Within the MeshManager software screen, double-click on a specific VMM (6300 or 7300 series) in the device tree.

If MeshManager is able to communicate with the device, the top of the right pane (in MeshManager) will be updated to show two smaller panes, (one for each of the two main components of the device).

Figure 3-1

VMM Status

2Within the MeshManager software screen, in the Config 2.4 QDMA Host... section, select the Action drop-down and choose the Configuration item from the list.

Figure 3-2 Selecting QDMS Host Configuration

6881011Y54-A September 2005

3-2