MOTOMESH 1.0.1 Vehicle Mounted Modem Users Guide

3From the Config 2.4 QDMA Host… window, select the Services tab.

Figure 3-3 QDMA Host Default Tab

4On the Services tab, enter the IP address of the network RDATE server into the RDATE Server field.

Figure 3-4 QDMA Host Services Tab

5Set the Local DHCP Server Enabled field to True.

This will enable the Local DHCP server (resident on the VMM) to allocate IP addresses to devices attached to the VMM, via hub or other similar device.

When the Local DHCP server is enabled the VMM device will not check for a DHCP server on the wired network.

6Provide a DHCP Start IP address.

This is the first IP address in a range of IP addresses that the local DHCP server will allocate to any new

6881011Y54-A September 2005

3-3