Chapter 4: Device Maintenance

2Select the Reset button to initiate the reset process.

Figure 4-15 Selecting the Update Device Firmware Option

3Standby for up to 120 seconds for the device to reset.

Figure 4-16 Device Reset Page – Please stand by…

4When the device has completed the reset process, it will automatically display the MOTOMESH Device Administration home page.

NOTE: After the completion of the reset, you may experience a slight delay when bringing up another web page. Be patient.

Restoring Factory Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

To restore the factory settings in your VMM device, the Restore Factory Defaults option is available

from the MOTOMESH Device Administration home page.

The Restore Factory Settings operation will restore the default web password for the administrator and monitor accounts. This will also return the local IP addresses to use the Network DHCP addressing scheme.

6881011Y54-A September 2005

4-8