Advanced Features
36
Making a Call Alert with the One Touch Access Button 
Procedure:
1Press the programmed One Touch Access button to make a Call Alert to the predefined alias or ID.
2The display shows Call Alert: <Subscriber Alias or ID>, indicating that the Call Alert has been sent.
3The green LED lights up when your radio is sending the Call Alert.
4If the Call Alert acknowledgement is received, a tone sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone sounds and the display shows Call Alert Failed.
Emergency Operation
An Emergency Alarm is used to indicate a critical situation. You are able to initiate an Emergency at any time on any screen display even when there is activity on the current channel.
Your dealer can set the duration of a button press for the programmed Emergency button, except for long press, which is similar with all other buttons:
•Short press – Between 0.05 seconds and 0.75 seconds
•Long press – Between 1.00 second and 3.75 seconds
The Emergency button is assigned with the Emergency On/ Off feature. Check with your dealer for the assigned operation of the Emergency button.
If short press the Emergency button is assigned to turn on the Emergency mode, then long press the Emergency button is assigned to exit the Emergency mode.
If long press the Emergency button is assigned to turn on the Emergency mode, then short press the Emergency button is assigned to exit the Emergency mode.
Your radio supports three Emergency Alarms:
•Emergency Alarm
•Emergency Alarm with Call
•Emergency Alarm with Voice to Follow 
English
