Identifying Radio Controls
4
Programmable Buttons
Your dealer can program the programmable buttons as shortcuts to radio functions or up to a maximum of six (6) preset channels/groups depending on the duration of a button press:
•Short press – Pressing and releasing rapidly (0.05 seconds).
•Long press – Pressing and holding for the programmed duration (between 1.00 second and 3.75 seconds).
•Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is applicable for all assignable radio/utility functions or settings. See Emergency Operation on page 36 for more information on the programmed duration of the Emergency button.
Assignable Radio Functions
Contacts – Provides direct access to the Contacts list.
Emergency – Depending on the programming, initiates or cancels an emergency alarm or call.
Ext PA On/Off – Toggles the audio routing between the connected public address (PA) loudspeaker amplifier and the radio’s internal public address (PA) system.
Manual Site Roam* – Starts the manual site search.
Manual Dial – Initiates a call by keying in any subscriber ID. Only available with a keypad microphone.
Nuisance Channel Delete* – Temporarily removes an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the user’s selected zone/channel combination from which scan is initiated.
One Touch Access – Directly initiates a predefined Group or Private Call, a Call Alert or a Quick Text message, or returns the user to a preset channel.
Option Board Feature – Toggles option board features on or off for option
PA On/Off – Toggles the radio’s internal public address (PA) system on or off.
Permanent Monitor* – Monitors a selected channel for all radio traffic until function is disabled.
Privacy – Toggles privacy on or off.
Radio Check – Determines if a radio is active in a system.
Radio Enable – Allows a target radio to be remotely enabled.
Radio Disable – Allows a target radio to be remotely disabled.
* Not applicable in Capacity Plus
English