B
Field Descriptions for the Advanced Options Page | |
Field | Description |
|
|
WAN Blocking | Prevents the SBG901 Configuration Manager or the PCs |
| behind it from being visible to other computers on the |
| SBG901 WAN. |
| Checkmark Enable to turn on this option. |
|
|
IPsec PassThrough | Enables the IPsec |
| the SBG901 Configuration Manager so that a VPN device (or |
| software) may communicate properly with the WAN. |
| Checkmark Enable to turn on this option. |
|
|
PPTP PassThrough | Enables the |
| Through protocol to be used through the SBG901 |
| Configuration Manager so that a VPN device (or software) |
| may communicate properly with the WAN. |
| Checkmark Enable to turn on this option. |
|
|
Remote Config Management | Allows remote access to the SBG901 Configuration Manager. |
| This enables you to configure the SBG901 WAN by accessing |
| the WAN IP address at Port 8080 of the configuration |
| manager from anywhere on the Internet. For example, in the |
| browser URL window, type http://WanIPAddress:8080/ to |
| access the SBG901 Configuration Manager remotely. |
| Checkmark Enable to turn on this option. |
|
|
Multicast Enable | Allows |
| specific address) to be passed to and from the PCs on the |
| private network behind the configuration manager. |
| Checkmark Enable to turn on this option. |
|
|
UPnP Enable | Turns on the Universal Plug and Play protocol (UPnP) agent in |
| the configuration manager. If you are running a CPE (client) |
| application that requires UPnP, select this box. |
| Checkmark Enable to turn on this option. |
|
|
Rg PassThrough | Disables NAT operation allowing all client computers to act as |
| passthrough clients. |
| Checkmark Enable to turn on this option. |
|
|
PassThrough Mac Addresses | Specifies up to 32 computers as passthrough clients not |
| subject to NAT, using their MAC addresses. |
To enable this feature, your cable operator may need to provide additional public IP addresses.
When done, click Apply to save your changes.
6 • Advanced Pages | 43 |