BASIC OPERATION
P l a c i n g a C a l l
1.With the power on, enter the number you wish to call.
2.Press ê.
3.Begin the conversation when the called party answers.
4.To terminate the call, press «.
To Correct an Error
To clear the last digit entered, press and quickly release ‚. To clear the entire entry, press and hold ‚ until the entire entry is erased.
If Entering More Than 10 Digits
You can call a phone number with up to 16 digits, but only the last 10 digits will appear in the display.
When recalling a stored phone number that is longer than 10 dig- its, the display will flash the memory location number and the last 10 digits of the number. Press ä again to view entire number.
Unsuccessful Call Attempts
If you hear one of the following signals, you have not successfully completed your call.
Tone / Message | Description |
|
|
| Cellular System Busy |
fast busy | Press ê again before ending the unsuccessful |
(reorder signal) | call attempt to automatically redial the call |
SND TO | (refer to Automatic Redialing page 18), or press |
REDIAL | « and dial the call again. |
|
|
| Cellular System Could Not Complete the Call |
alternating | You may have tried to place a call before the |
high/low tone | NS (No Service) indicator stops flashing to let |
(intercept) | you know your phone was fully operative. |
SND TO | Either press ê again before ending the |
REDIAL | unsuccessful call attempt to automatically redial |
| the call (refer to Automatic Redialing page 18), |
| or press « and dial the call again. |
|
|
busy signal | The called party’s line is busy. |
|
|
17
