3-10

Amplifier Setup

8Check the amplifier output tilt by measuring the high band- and low band-edge carriers.

ƒHigh = channel 116 (745.25 MHz), channel 136 (865.25 MHz), or channel 158 (997.25 MHz)

ƒLow = channel 2 (55.25 MHz) or channel 3 (61.25 MHz)

ƒIf the tilt is less than required, install a higher value input equalizer.

ƒIf the tilt is greater than required, install a lower value input equalizer.

ƒIf the high value equalizer provides too much tilt and the low value equalizer provides too little tilt, use the lower value equalizer. Under-equalization is preferred to over-equalization.

If the amplifier was set up using an SCS-*, the JXP input pad must be increased or decreased by the amount of change made in the SCS-* value. Therefore, to maintain a proper gain level, it is necessary to adjust the input pad value as follows:

ƒFor each increase in SCS value, decrease the input pad by 1 dB.

ƒFor each decrease in SCS value, increase the input pad by 1 dB.

ƒIf you replace an SFE with an SCS, reduce the value of the input pad by the value of the SCS.

9Measure the output level at the highest frequency.

It should be within 1 dB of the system design level. If it is not, you must adjust the mid-stage pad (JXP MID) accordingly. Refer to Section 6, “Operating Tips,” for mid-stage padding information and recommendations.

BLE100 Installation and Operation Manual

Page 31
Image 31
Motorola BLE100 operation manual Amplifier Setup

BLE100 specifications

The Motorola BLE100 is an innovative device designed for efficiency and reliability in the realm of Bluetooth Low Energy (BLE) technology. As a compact and multifunctional solution, it caters to diverse applications, from cost-effective asset tracking to improving smart home environments. The BLE100 stands out for its practicality, making it ideal for both personal and commercial use.

One of the standout features of the Motorola BLE100 is its low power consumption. Leveraging Bluetooth Low Energy technology, the device can operate for extended periods without frequent battery replacements—ideal for remote monitoring applications where long-lasting performance is crucial. This characteristic ensures that users can rely on the BLE100 for day-to-day operations without the hassle of constant recharging.

In terms of connectivity, the BLE100 boasts seamless and stable connections over considerable distances. With a range of up to 100 meters in open environments, the device excels in maintaining reliable communication even in challenging conditions. Its compatibility with a wide array of Bluetooth-enabled devices ensures versatile usability, allowing users to integrate the BLE100 into existing systems with ease.

The Motorola BLE100 also prioritizes user-friendly design. The device is lightweight and compact, ensuring ease of installation and portability. Its robust build makes it resilient against environmental factors, while its sleek design enhances its aesthetic appeal. Moreover, straightforward setup processes and user interfaces facilitate quick deployment for various applications.

Another notable characteristic of the BLE100 is its advanced security features. With built-in encryption and pairing mechanisms, users can safeguard their data and communication. This is particularly vital in applications requiring confidential or sensitive information transfer.

The device supports various protocols and adheres to international standards, which ensures versatility and compatibility in multiple applications. Whether it's intelligent home systems seeking efficient device interaction or logistics needing simple asset tracking solutions, the Motorola BLE100 meets diverse needs.

In conclusion, the Motorola BLE100 is a powerful device that marries efficiency, functionality, and security. Its low power usage, reliable connectivity, user-friendly design, and robust features make it a top choice for anyone looking to enhance their Bluetooth Low Energy applications. With the BLE100, users can explore a wide range of possibilities, from smart technology integration to simplified monitoring solutions, all designed to optimize performance while maintaining a user-centric approach.