Manuals / Motorola / Computer Equipment / Network Router

Motorola BLE100 operation manual Alignment Procedure

Models: BLE100

1 48
Download 48 pages 20.74 Kb
Page 34
Image 34

Amplifier Setup

3-13

ƒPerform the return optical link set up before performing amplifier set up

ƒSpecify reverse alignment design levels for a single carrier

ƒConsider sweep equipment as a single carrier and operate at design levels

ƒDo not include injection point losses in reverse design levels

If JXP THERM devices (JXP-TH*C) are specified for level control, they should be installed in the JXP THERM pad facility (illustrated in Figure 2-8).

Alignment Procedure

The return amplifier configuration includes one high-gain (30 dB) return amplifier hybrid, and an appropriate SRE-*-* equalizer. All components are plug-in and are easily installed.

To align the return path:

1If the BLE100 is powered, remove all fuses before you perform the following steps.

2Install the design value pad in the return output pad location (JXP OUT).

3Install the design value return equalizer, SRE-*-*, in the RTN EQ location.

4Verify that the return input pad location (JXP-IN) has a 0 dB pad (or JXP-ZX jumper) installed.

5If you require an ICS, install it in the ICS location. If you plan to install the ICS later, install a JXP-2B to simulate the through-loss of the ICS. This eliminates the need to rebalance the return path if you install the ICS later.

6Verify that the return output pad socket (JXP OUT), located between the hybrid output and the SRE-*-*, has a 0 dB pad (or JXP-ZX jumper) installed.

7Verify that the return thermal pad socket (JXP THERM), located between the hybrid output and the SRE-*-*, has a 0 dB pad (or JXP-ZX jumper) or JXP-TH*C installed.

8Set the sweep equipment output level to the amplifier’s design input level. Add insertion point loss.

9If required, change the return output pad (JXP OUT) and/or return equalizer to achieve, as close as possible, a match of the reference level as compared to the node.

10Verify the sweep response of all insertion points if applicable.

11Verify that the pad and equalizer values are similar to the map design values.

You can verify proper return alignment by injecting a carrier, at the design level, into any amplifier at random. Proper alignment is achieved if you observe the reference level at the headend optical receiver output.

BLE100 Installation and Operation Manual

Page 33 Page 35
Page 34
Image 34
Motorola BLE100 operation manual Alignment Procedure
Page 33 Page 35

BLE100 specifications

The Motorola BLE100 is an innovative device designed for efficiency and reliability in the realm of Bluetooth Low Energy (BLE) technology. As a compact and multifunctional solution, it caters to diverse applications, from cost-effective asset tracking to improving smart home environments. The BLE100 stands out for its practicality, making it ideal for both personal and commercial use.

One of the standout features of the Motorola BLE100 is its low power consumption. Leveraging Bluetooth Low Energy technology, the device can operate for extended periods without frequent battery replacements—ideal for remote monitoring applications where long-lasting performance is crucial. This characteristic ensures that users can rely on the BLE100 for day-to-day operations without the hassle of constant recharging.

In terms of connectivity, the BLE100 boasts seamless and stable connections over considerable distances. With a range of up to 100 meters in open environments, the device excels in maintaining reliable communication even in challenging conditions. Its compatibility with a wide array of Bluetooth-enabled devices ensures versatile usability, allowing users to integrate the BLE100 into existing systems with ease.

The Motorola BLE100 also prioritizes user-friendly design. The device is lightweight and compact, ensuring ease of installation and portability. Its robust build makes it resilient against environmental factors, while its sleek design enhances its aesthetic appeal. Moreover, straightforward setup processes and user interfaces facilitate quick deployment for various applications.

Another notable characteristic of the BLE100 is its advanced security features. With built-in encryption and pairing mechanisms, users can safeguard their data and communication. This is particularly vital in applications requiring confidential or sensitive information transfer.

The device supports various protocols and adheres to international standards, which ensures versatility and compatibility in multiple applications. Whether it's intelligent home systems seeking efficient device interaction or logistics needing simple asset tracking solutions, the Motorola BLE100 meets diverse needs.

In conclusion, the Motorola BLE100 is a powerful device that marries efficiency, functionality, and security. Its low power usage, reliable connectivity, user-friendly design, and robust features make it a top choice for anyone looking to enhance their Bluetooth Low Energy applications. With the BLE100, users can explore a wide range of possibilities, from smart technology integration to simplified monitoring solutions, all designed to optimize performance while maintaining a user-centric approach.