Configuring TCP/IP

5

Chapter 5: Configuring TCP/IP

This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up. Configure all client computers on your network for TCP/IP (the protocol that controls communication among computers). Two examples are provided in this document:

Configuring TCP/IP in Windows XP

Configuring TCP/IP in Windows Vista

NOTE

Follow the instructions in your computer user manual for other Operating

Systems.

Configuring TCP/IP in Windows XP

1.On the Windows desktop, click Start to display the Start window:

Figure 5-1:Windows XP Start Window

2.Click Control Panel to display the Control Panel window. The display varies, depending on your Windows XP view options. If the display is a Category view as shown in Figure 5-2,continue with Step 3. Otherwise, skip to Step 5.

68P09301A65-A

5-1

FEB 2009

 

Page 40
Image 40
Motorola CPEI 775 user manual Configuring TCP/IP in Windows XP