Motorola D1001, D1004, D1003, D1002 manual Select a base, Unregister a handset, Pin, Reset

8.7Select a base

You can register your D1000 handset with up to 4 bases. Once registered, you can switch between bases, for example, bases at home and at work.

1. Press mand scroll dto ADVANCED SET and press

m.

2.Scroll dto REGISTRATION and press m.

3.SELECT BASE is displayed. Press m.

-The available bases are displayed with the current base number flashing.

4.Enter the number of the base you want – 1,2,3 or 4 and press m.

-When the base is found you hear a beep. If not found, the display shows UNREGISTERED.

8.8 Unregister a handset

1. Press mand scroll dto ADVANCED SET and press

m.

2.Scroll dto UNREGISTER and press m.

3.Enter the 4 digit master PIN and press m.

-Display shows the registered handset numbers.

4.Scroll uor d to select the handset you want to delete and press m.

-UNREGISTERED is displayed on the handset screen.

8.9PIN

The 4-digit master PIN is used when registering or unregistering a handset and when changing some settings on your D1000. The default setting is 0000. You can change this PIN for more security.

1.Press m, scroll dto ADVANCED SET and press m.

2.Scroll dto PIN. Press m.

3.Enter the current 4 digit master PIN and press m. (Default setting 0000).

4.Enter the new PIN and press m.

NOTE

Make a note of your PIN. If you forget your PIN you will need to reset your product.

8.10Reset

This will reset your D1000 to its default settings.

1.Press m, scroll dto ADVANCED SET and press m.

2.Scroll dto RESET UNIT. Press m.

3.CONFIRM? is displayed. Press m.

NOTE

Entries stored in the phonebook are retained. After reset, depending on your country, the welcome mode setting may be shown on the handset display.

Advanced settings 31