Motorola D1003, D1004, D1002, D1001 manual Intrusion, ECO mode

1.Press m, scroll dto ADVANCED SET and press m.

2.Scroll dto SEL. COUNTRY. Press m.

3.Enter the 4-digit master PIN and press m.

4.Scroll uor dto display the required country.

5.Press mto confirm.

8.14Intrusion

When an external call is taking place, another handset registered to the base can join in, making the call a 3-way conference, just by pressing <.

To enable this, Intrusion must be switched On.

1.Press m, scroll dto ADVANCED SET and press m.

2.Scroll dto INTRUSION. Press m.

3.Scroll uor dto ON or OFF.

4.Press mto confirm.

5.Press >to return to standby.

8.15ECO mode

To reduce the level of power emissions, you can select low power or ECO mode. When the ECO mode is set to ON, the base transmission power will be reduced.

To turn ECO Mode to ON or OFF:

1.Press m, scroll dto ADVANCED SET and press m.

2.Scroll dto ECO MODE and press m.

3.Press uor dto highlight ON or OFF then press mto confirm.

-A confirmation beep is emitted and the handset display will switch between the handset’s name and

ECO MODE.

NOTE

When Eco Mode is set to ON, the handset range will be reduced.

Advanced settings 33