Motorola DCX3501-M quick start Front Panel, Rear Panel

Before You Begin

Front Panel
		Cursor — Menu navigation
The front panel provides Power, Message, Data, and Home LAN indicators, Output	1
		Select — Selects menu options
video format indicator, 4-character 7-segment display, two Recording indicators, IR
remote control sensor, and buttons.	2	Power — Turns the set-top on and off (standby)
	3	Menu — Displays the menu
	4	Guide — Displays the program guide
	5	Info — Displays current channel and program information
	6	Format* — Changes the video output format
	7	Channel — Changes channel up or down

Rear Panel

*Availability of certain features is dependent upon application support

The rear panel contains a power input; connectors for video, audio, and RF cabling; data output; and data interface connectors. Some connectors are not enabled and require the support of application software.

1Cable In — Connects to the signal from your service provider

2RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR

3S-Video — Connects to S-Video (SDTV) input of TV or VCR

4Digital Audio (S/PDIF)* — Provides Dolby® Digital 5.1 audio or PCM output

5YPbPr — Component video output (HDTV)

6Video — Composite video (SDTV) output

7Audio — Audio L/R outputs

DCX3501-M Quick Start Guide

8eSATA* — External Serial ATA disk interface ...Not active at this time.

9HDMI — HDTV audio and video connector

10USB* 2.0 — High-Speed peripheral device connection

11Ethernet* — Network connection

12IR Remote Input — Connects to a remote control set-top accessory cable

13IEEE-1394 — Audio and HDTV video device connection (US models only)

14Power cord connector — DC input

*Feature is dependent upon application support

2