Advanced Radio Operations: Accessing the Advanced Menu | |
|
|
Remote Monitoring (DTR2450 Models Only)
NOTE: Manager Mode must be enabled in order to use this feature. Refer to page
Remote Monitoring allows you to monitor a selected radio either for training purposes or if the target radio user is unable to press the PTT button.
1.From the Advance menu, scroll to highlight Remote Monitor and press 
under Select. The Remote Monitor screen appears.
Remote Monitor
Joe Smith
Jones
Select Back
2.Scroll to highlight a radio from the list to monitor and press 
under Select. The screen changes to show the radio’s status.
Remote Time (DTR2450 Models Only)
Remote Time synchronizes the date and time to all other radios on your channel. Any receiving radio must have the transmitting radio User ID in their contact list to accept the time/date update.
NOTE: Radios must be turned on and within range to receive this broadcast message. The transmitting radio does not receive a confirmation for any failures.
1.From the Advance menu, scroll to highlight Remote Time and press 
under Select. The screen displays a confirmation to start remote time.
Start Remote
Time?
YesNo
2. Press 
under Yes.
June 22, 2006 | 6864242V01 |
