Chapter 5 Cloning Mode

Entering Cloning Mode

1.Press to turn the source radio on.

2.Enter the cloning mode by performing the following steps in sequence:

a.Hold down and press the PTT button three times.

b.Press the Left .

c.Press .

d.Press the Right

e.Hold down and press the PTT button three times. The Clone Menu appears.

Clone Menu

Duplicate Rad...

Remote Add C...

Remove Delet...

Select Reset

Adding/Deleting a Contact

These menus are used to add or remove a contact from a Private contact or PrivateGroup contact over the air. This feature is used primarily for fleet maintenance. When adding/deleting a contact to a PrivateGroup contact, the radio attempts to contact all radios within that PrivateGroup and notifies any radios that did not receive the update.

1. From the Clone menu scroll to select Send Contact. Press under Select.

Remote Add C...

Add:Invalid

To:Invalid

Change Prgm

2. Scroll to select ADD:.

Page 55
Image 55
Motorola DTR2430, DTR2450 manual Cloning Mode, Clone Menu, Duplicate Rad, Remote Add C Remove Delet Select Reset