Motorola F3 Tools and Test Equipment, General Test Equipment and Tools, 6809505A65-A, October 27

Level 1 and 2 Service Manual Tools and Test Equipment

Tools and Test Equipment

Table 1 lists the tools and test equipment used on F3 telephones. Use either the listed items or equivalents.

Table 1. General Test Equipment and Tools

Motorola	Description	Application
Part Number1
See Table 5	Charger	Used to charge battery and to power phone
	Antistatic Mat Kit (includes 66-80387A95 antistatic	Provides protection from damage to phone caused
0180386A82	mat, 66-80334B36 ground cord, and 42-80385A59
		by electrostatic discharge (ESD)
	wrist band)
8102430Z04	GSM / DCS / PCS Test SIM	Used to enable manual test mode
6680388B67	Disassembly tool, plastic with flat and pointed	Used during assembly/disassembly of phone
	ends (manual opening tool)
6680388B01	Tweezers, plastic	Used during assembly/disassembly
RSX4043-A	Torque Driver	Used to remove and replace screws
—	Torque Driver Bit T-5 Plus, Apex 440-6IP Torx Plus	Used with torque driver
	or equivalent
	Size 0 Phillips head driver	Used to remove transceiver board screws
HP34401A2	Digital Multimeter	Used to measure battery voltage

1.To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.

2.Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.

6809505A65-A October 27, 2006 23