Motorola IHDT56KQ1, H75XAH6JS5AN manual Receiving code calls, Receiving all LINCaround calls

Note: The LINCaround tone consists of 4 rapid beeps.

2Release the PTT button to listen. If you receive an error message:

•No one is on your channel or code.

•You are out of range.

receiving code calls

When you receive a code call, Receive will appear on the display. After hearing the LINCaround tone, you have 6 seconds to reply before the call times out.

To reply to the call, press the PTT button.

Note: An incoming LINCaround call can be terminated at any time by pressing @.

receiving all LINCaround calls

If you set the code to Receive All, your phone can receive LINCaround transmissions from

any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to Receive All, the code that the transmission was received on will replace Receive All on the display.

Note: You cannot initiate a code call when the code is set to Receive All.

To set the code to Receive All:

1From the LINCaround idle screen, press : under Edit.

2Scroll to Code.

3Press : under Edit.

4Select Receive All.

5When you are finished, press : under Back to return to the LINCaround idle screen.

To reply to a call with the code set to Receive All:

LINCaround 87