Motorola I275 manual Channels and Codes, Exiting Direct TalkSM, Talk Range

Direct TalkSM

Note: When switching from the network to Direct Talk, the last channel and code that were set appear on the idle screen.

While in Direct Talk, this icon m appears on the display, indicating there is no network signal and Direct Talk is active.

Exiting Direct TalkSM

To set your phone to network mode when Direct Talk is active:

1From the Direct Talk idle screen, press m.

2Select DT Options.

3Select Exit DirecTalk.

Switching to Network Please Wait displays. After a few seconds, the network idle screen appears.

Talk Range

Phones used in Direct Talk mode should be a minimum of 6 feet apart to maximize performance and improve transmission range.

Channels and Codes

Your phone has 10 channels and 15 codes.

Channels are divided into sets of frequencies that allow you to make and receive Direct Talk calls. Other parties may also be talking on the same channel.

Codes help minimize interference from unwanted messages and other disturbances when you are on the same channel as others.

To have a conversation, all parties must be on the same channel and code. For private Direct Talk calls, the person you are calling must be in Direct Talk and set to the same channel to which you are set in order to receive your call.

Note: When making a Direct Talk call, all parties that are on your code and channel can hear your conversation.

To set a channel:

1From the Direct Talk idle screen, press A under Edit.

2Scroll to Channel.

3Press A under Edit.

4Select a channel.

5When you are finished, press A under Back to return to the idle screen.

To set a code:

1From the Direct Talk idle screen, press A under Edit.

36