Motorola I275 manual Viewing Contacts, Searching for a Name

•A number or address — Each Contacts entry must contain a number or address. This may be any type of phone number, Direct Connect number, Group number, Talkgroup number, email address, or IP address.

Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 49.

•A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.

•A voice name — If you create a voice name for a

number, you can then dial that number by saying the voice name into your phone. This icon P appears to the left of the Contacts type icon if a voice name is assigned.

Viewing Contacts

To access Contacts:

From the main menu, select Contacts. -or-

If you are on a call: Press m. Select Contacts.

To view entries:

1From the Contacts list, scroll to the entry you want to view.

Viewing Contacts

2If an entry has more than one number or address stored, <> surrounds the Contacts type icon. Scroll left or right to view the icon for each number stored in the entry.

3Press O to view the entry.

4Scroll to view the other numbers and addresses stored for the entry.

Tip: To view more entries, continue scrolling.

Searching for a Name

To search for a name in Contacts:

1From the Contacts list, press Aunder Search.

-or-

If Search is not one of your options: Press m. Select Search.

2Enter the name you want to see.

3Press O.

Your phone finds the name you entered or the nearest match.

45