. |
| |
. |
| |
. |
| |
. |
| |
. |
| |
. |
| |
. |
| |
. |
| |
. | Setting a Destination Using Address Book | |
. | ||
|
PC*MilerMobile 
Use Address Book
Search Directory
Change Options
Help
…
SELECT … EXIT
This section covers the screens you see when selecting Use Address Book and pressing the button under
SELECT.
The Address Book allows you to select destination addresses you already have listed in your address book, save your current position as an address entry to your address book, and/or add addresses to your destination list by typing the entry on the keypad.
To enter letters, press the key multiple times to display each letter.
For example, press 2 once to type a; two times to type b; three times to type c; four times for 2.
If you have multiple letters and/or numbers that are located on the same key, wait three seconds before typing the next letter or number.
While you are within PC*MILERMobile, the application defaults to Alpha mode, except in fields where only numeric entries are made (i.e., zip code, street number).
Address Book
New Address Save Position
Address Entry #1 Address Entry #2
SELECT BACK
Start With
Zip Code
City, State
Current Location
OK BACK
When you press the button under SELECT, PC*MILERMobile displays the Address Book screen.
To enter a new address, highlight New Address and press the button under SELECT. PC*MILERMobile displays the Start With screen.
If you are going to a place in the same city you are currently in, highlight Current Location and press the OK button. This will automatically determine the city and state you are in.
If you do not know the zip code, highlight City, State and press the button under OK. PC*MILERMobile displays a blank City/State screen, where you must use the unit’s keypad to type the state abbreviation and city.
If you know the zip code for the destination, highlight Zip Code and press the button under OK.
Note: This option automatically resolves the city and state based on the zip code.
PC*MILERMobile User’s Guide | 17 |
