Getting Started

Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity.

Activating your Mike Account

Before you can begin using your i833 handset, you need to activate your Subscriber Identity Module (SIM) card on The Mike Network. Your SIM card holds the information required to enable your handset to connect to The Mike Network. It also stores your user information, language preference and contact list entries.

If you purchased your handset through an Authorized Mike Network Dealer, your SIM should already be active.

If you purchased your handset at another location, follow the “Getting Activated” instructions in the Mike Services User’s Guide.

Powering On and Off

The first time you power your handset on, screen may appear asking you to update your browser information. This means you must enable security.

To power your handset on:

1Open the flip.

2Press p.

Note: Pressing p for more than 5 seconds turns on Airplane mode. See “Airplane Mode — Temporarily Turning Off Calls” on page 82.

To power your handset off:

1Open the flip.

2Press and hold p.

If the Enter SIM PIN Code screen appears, enter your SIM PIN. See “Entering the PIN” on page 12. Press Aunder Ok.

Note: When you receive your handset, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 13).

6

Page 14
Image 14
Motorola i833 manual Activating your Mike Account, Powering On and Off