Motorola Jazz manual Messages, Duplicate, Vibrate?

➋		• Press * to choose the SCROLL SPEED
	H
		you desire.
	LINE BY LINE =
		• Press ) to set and exit.
		Note: There are four scroll speeds: LINE-BY-
		LINE, SLOW, MEDIUM and FAST.

Receiving/Reading Messages				MESSAGES
When a message is received, the pager either alerts audibly (AUDIBLE,
CHIRP, ESCALERT and all PLEASING modes except NO ALERT) or vibrates
(VIBRATE mode). If the NO ALERT mode is selected, no alert happens for
normal messages. The unread message indicator ¤ (normal message)
flashes. The slot number of the latest message displays on top.
➊			• Press ) to display the message status
	4	H
			screen. Press ) to read the latest
	¤¤¤$
			message.
			Note: The flashing unread message
			indicator ¤ changes to $ when it is
			selected. To read a different message,
			press + to select the message slot
			number, then press ).

7

MESSAGES

➋

➌

➍

8

4H Q

DINNER AT 7:30PM

4H Q

MEET AT THE CLUB

4H

3:51P 9/29

•The first screen of the message displays. If

the message is longer than one screen display, a message continued indicator Q appears on the top line until the last screen is displayed.

•If the pager is set to scroll the message automatically (SLOW, MEDIUM or FAST scroll speeds) the remainder of the message is displayed at that speed.

•If the scroll speed is set to LINE-BY-LINE, the remaining screens will automatically display one line at a time every few seconds.

Note: To pause the message in any scroll mode, press ). Press again to continue.

In LINE-BY-LINE mode, continue pressing ) until the last screen is displayed.

•The last screen displays the time and date the message was received. After an interval, the pager returns to the standby screen.

Note: If a message is unread and audible alerts are chosen, the pager gives a periodic alert until all unread messages are read. This alert will continue for up to 30 minutes. A message is considered read if any part of the message is displayed.

Duplicate Messages
➊			• If a duplicate personal message is received,	ALERTS
	4	H ¦
			the Duplicate icon ¦ displays on top.
	¤¤¤$
			• Press ) to view the duplicate message.
➋			• The word DUPLICATE displays before the
	4	H ¦ Q
			duplicate message is displayed.
	DUPLICATE 1

Choosing the Alert Mode

You can choose one of four alert modes: AUDIBLE, VIBRATE, CHIRP, or

ESCALERT.

Note: In ESCALERT mode, the alert grows increasingly louder. In AUDIBLE mode you can set a PLEASING alert or NO ALERT.

9

➊• From the Standby screen, press and release *until ALERTS? displays. Press + to enter the ALERTS menu. Press + again to enter the ALERT MODE menu.

	➋			• Press * until the desired alert mode
		H
				displays (e.g. VIBRATE).
		AUDIBLE?	w
ALERTS	➌			• The pager gives off a sample of each
		G
				was chosen.
		VIBRATE?	x	displayed alert. Press ) to set and exit.
	➍		G	• The Standby screen displays with either
				H(the audible alert icon) or G (the vibrate
		9:05 P	9/28
				alert icon), depending on which alert mode

10