Motorola Jazz manual Alarms, General t, 1000 a, C K U P W E N D Y £, 900 a

	➏			• When a GENERAL alarm expires, this screen
			HJ
				displays and the pager alerts.
		GENERAL t 1
ALARMDIRECTORYPHONETRAVEL				• Press any button once to stop the alarm, and		ALARMS
	➐			again to clear the message.
				• If the GENERAL alarm is not stopped during
			HJ
				activation, the ALARM icon flashes.
		10:00 A	9/30
				• Press any button once to read the message,
				and press again to clear.
	Note: You can temporarily disable a daily alert (for example, on a weekend).
	To disable the alert, follow these steps.
	1.	From the Standby screen, press and release *until ALARMS?			displays.
		Press + to enter the ALARMS menu. Press *+ to enter GENERAL
		alarms mode.
	2.	Press + + to move to the alert enable/disable field.
	3.	Press * until I (the disable alert icon) displays.
	4.	Press ) to set and exit. The alarm remains set and enabled, but the
		alert won’t occur until it is re-enabled.
	To re-enable the alert, follow these steps.
	1.	From the Standby screen, press and release *until ALARMS?			displays.

15

Press + to enter the ALARMS menu. Press *+ to enter GENERAL alarms mode.

2.Press + + to move to the alert enable/disable field. Press * until J (the enable alert icon) displays.

3.Press ) to set and exit.

	To disable (erase) the alarm settings, follow these steps.
ALARMS	1. From the Standby screen, press and release *until ALARMS? displays.
	Press + to enter the ALARMS menu. Press *+ to enter GENERAL
	alarms mode.
	2. Press +, then press * until -- (the disable alarm icon) displays. Press
	) to set and exit.
	EVENT Alarms
	You can set up to three EVENT alarms. Each EVENT alarm allows you to keep
	a special reminder message that displays when the alarm is activated and the
	pager alerts. These can be set to alert either on a daily basis or one-time only.

➊• From the Standby screen, press and release *until ALARMS? displays. Press + to enter the ALARMS menu. Press **+ to enter EVENT alarm mode.

16

➋
	01//	HI

AAAAAAAAAAAAAA

➌03., HI

AAAAAAAAAAAAAA

➍03., HJ

AAAAAAAAAAAAAA

➎
	03.,	HJ

P I C K U P W E N D Y £

•Press * to choose EVENT alarm 01, 02 or 03.

•Press +, then press * until . , (the enable alarm icon) displays. Press + to move to the next field.

•Press * until J (the enable alert icon) displays and press + to move to the Message field.

•Press * to scroll through the characters available, then press + to move to the next.

Note: You can enter up to 14 characters (letters, numbers or spaces). If the message is less than 14 characters long,

advance to the rubout character (¨) and press + to fill the remaining character fields with blanks.

•At the last character field, press + to move to the alarm Time-Date screen.

17

ALARMS

ALARMS

➏
	03.,	HJ
	9:00 A	9/29

➐HJ

9:05 P 9/28

➑HJ

P I C K U P W E N D Y

18

•Press * to set the hour to the desired value.

•Move to the Minute, AM/PM, Day and Month fields by pressing+, then press * to set the value for each field.

•Press ) in any field to set and exit.

Note: You may only set one EVENT alarm at a time. You must press ) to save each event alarm prior to setting the next alarm.

Note: To alert on a daily basis set the Day and Month to --/--.

•The Standby screen displays with J (the enable alert icon).

•When an EVENT alarm expires, the message displays and the pager alerts. Press any button once to stop the alarm, and again to clear the message.