Using the Telephone

Switching the Handset On/Off and Display Illumination

When the handset is placed on the base station or charging unit, it switches on automatically and starts to charge up. Allow the batteries to be charged for 14 hours without interruption the first time they are charged. The telephone does not have an

On/Off switch.

Note: The display illumination switches on automatically when the handset is removed from the charging station or pressing any key. It also lights up when calls are received. It goes out automatically when no key has been pressed for 10 seconds.

Selecting the Language

Ten different languages are available for selection for each handset. Proceed as follows to select a language:

1.Press the key repeatedly until menu item LANGUAGE appears.

2.Press the key to confirm the item.

3. Press

as often as necessary to select the required language.

4. Press the key to confirm the selection.

Making Internal Calls

If more than one handset is registered on the base station, internal calls can be made free of charge.

1.Press the key.

2.Press the number of the required handset (1..4).Carry out the conversation.

3.Press the key to end the call.

Note: If an external call is received during an internal call, short acoustic signals are issued (call waiting).

Making External Calls

There are two ways to dial a number, namely direct dialing or on-hook dialing.

Direct dialing

1. Press the key and wait for the dialing tone.

2. Dial the telephone number and complete the call.

3. Press the key to end the call.

On-hook dialing

1. Dial the telephone number.

2. Delete any incorrect entries by pressing the key.

3. Press the key. The number entered is dialed and a connection established. Carry out the conversation.

4. Press the key to end the call.

Hands-free Mode

There are two methods with which to have telephone conversations in hands-free mode, namely using direct dialing or by switching over during the call.