Using the Telephone
20
Taking Calls
When an external call is received, all the handsets registered and the base station ring.
Handset is in the base station
1.Take the handset from the base station; a connection is automatically established
(when the AUTO ANS function is active). Otherwise, press the 
key.
2.Carry out the conversation.
3.Press the 
key to end the call.
Handset is not in the base station
1.Press the 
key. Carry out the conversation.
2.Press the 
key to end the call.
Prefix Dialing
1. | Press the 0 key for two seconds. | . | |
2. | Supplement the call number and press the | ||
key to establish a connection. |
Note: The prefix number (e.g. an access code) must have been programmed beforehand. Refer to "Handset Settings".
Dialing from the Phone Book
1. | Press the | key; the first entry in the phone book appears. | |
2. | Press the | or | key to select the required subscriber from the phone book. |
| Alternatively, enter the first letter of the name required. | ||
3. | Press the | key. The number is dialed. Carry out the conversation. | |
Call Log Operations
B row se, Call B ack, Delete, S ave
If calls have been received in your absence, these are collected in the CALL LOG memory when your telephone service has enabled this function.
1.Press the 
key as often as necessary until the CALL LOG menu appears.
2.Press the 
key. Alternatively, press and hold the 
key.
3.Press the 
or 
keys to browse through the CALL LOG memory.
4.Press the 
key to return the call. Or
5. Press and hold the | key two seconds to delete one or all the entries. Selection | |
is made using the or | key. Press the | key. |
Or |
|
|
6.Press the 
key to enter the subscribers in the phone book.
7.Enter the name.
8.Press the 
key.
9. Press the | or | key to select the normal ring or VIP ring. |
10.Press the |
| key. |
Using the Telephone
19
