Motorola ME4066 Series manual Muting the Microphone, Holding Calls / Forwarding Calls

Using the Telephone

Note: 1. The CALL LOG symbol and display indicator only disappear after browsing through all the entries. 2. It is only possible to enter subscribers in the phone book who are not already entered.

Muting the Microphone

1. Press the		key to switch the microphone on		Telephone
	or off during a call.
Holding Calls / Forwarding Calls
If the telephone is connected to a PBX network, it is possible to put calls on hold and				the
call other extensions or to forward calls.
1.	Press the	key to put the call on hold.
				Using
2.	Dial the number of the extensions (e.g. 23).
3.	Press the	key once more to take the call
	back again or the		key to forward the call.

21

Teleconference and Intercom Call Transfering

After having received an external call, it is possible to include a second handset in the conversation (three-way conference).

1. Press the key and enter the number of the corresponding handset (e.g. 2) which should be included in the call.

2.The external caller is kept on hold. As soon as handset 2 takes the call, press key to transfer the call to handset 2.

Or

3.The external caller is kept on hold. as soon as handset 2 takes the call, press and

hold	key to activate the teleconference.
4. By pressing the		key, any of the handsets can be disconnected from the

teleconference and the other handset continues with the external call.

Entering a Dialing Pause (P)

If the MOTOROLA telephone is connected to a PBX system, it may be

necessary to insert a dialing pause. To do this, press the key after entering the relevant digit, e.g. 0, for an outside line (0P....). A 'P' appears in the display indicating

a pause. The pause can also be entered when programming numbers in the phone book.

22