Symbol MS4404 - RS-232 (Serial) Interface 9 - 17

Nixdorf Beep/LED Options

When Nixdorf Mode B is selected, this indicates when the imager should beep and turn on its LED after a decode.

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When you select Send Bar Codes with
Unknown Characters, all bar code data is sent except for unknown characters, and the imager emits no error
beeps. When you select Do Not Send Bar Codes With Unknown Characters, bar code data is sent up to the first
unknown character and the imager emits an error beep.
*Normal Operation
(Beep/LED immediately after decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
*Send Bar Code
(with unknown characters)
Do Not Send Bar Codes
(with unknown characters)