Getting Started 2 - 3

Connecting the MiniScan

To connect the MiniScan to the host, connect the imager cables in the order shown in Figure 2-2.

Figure 2-2

Typical Connection Diagram

Figure 2-3

Trigger Jack Connector Pins

1
4
5
2
Trigger or Photo
Sensor (Optional)
To H ost
3
Trigger Jack (Optional)
See Figure 2-3
Male jack shown for reference
Note: Due to many variations of
jack and socket styles, identify
terminals as shown before
soldering leads.
1
1
2
2
33
Insertion
Direction
1 - Ground (Sleeve)
2 - Battery (Middle Contact)
3 - Trigger (Tip)
1 - Ground (Sleeve)
2 - Vcc (Middle Contact)
3 - Trigger (Tip)