2 - 8 Symbol MS4404/MS4407 Integration Guide

Accessories
The following accessories are available for the MiniScan imager, and can be found in Symbol’s Solution Builder
(ordering guide).
Table 2-4
MiniScan Imager Accessories
Accessory Standard Part Number ROHS Part Number
Power Supplies*
110V power supply, US 50-14000-008 50-14000-008R
220V power supply, Europe 50-14000-009 50-14000-009R
100V power supply, Asia 50-14000-010 50-14000-010R
264V Universal power supply
(also order cables below) 50-14001-001 50-14001-001R
DC line cord (power supply to imager) 50-16002-009 50-16002-009R
AC line cord (wall outlet to power supply) 23844-00-00 N/A
RS-232
Female DB9 with straight connector to RS-232
host (female DB9), with trigger jack and no
beeper
25-13227-XX 25-13227-XXR
Female DB9 with straight connector to RS-232
host (female DB9), with trigger jack and beeper* 25-13228-XX 25-13228-XXR
Female DB9 with straight connector to RS-232
host (female DB9) 25-58918-XX 25-58918-XXR
Female DB9 with straight connector to RS-232
host (female DB9), with trigger jack and no
hardware handshaking
25-63736-XX 25-63736-XXR
USB
Female DB9 with straight connector with trigger
jack and beeper to USB (Type A connector) 25-58925-XX 25-58925-XXR
Female DB9 straight to USB 25-58926-XX 25-58926-XXR
Cable Adapters
Female 25 pin D, TxD on pin 2 50-12100-378 N/A
Female 25 pin D, TxD on pin 3 50-12100-377 N/A
Male 25 pin D, TxD on pin 2 50-12100-380 N/A
Male 25 pin D, TxD on pin 3 50-12100-379 N/A
*For power connection, this device must be connected to a limited power source.
Note: DO NOT use cables with an integrated beeper when operating at 12 VDC.