Imager Preferences 7 - 13
Snapshot Aiming Pattern
Parameter # F0h, 2Ch
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disable
Snapshot Aiming Pattern to turn the aiming pattern off.
Image Cropping
Parameter # F0h, 2Dh
This parameter crops a captured image. If Disable Image Cropping is selected, the full 640 x 480 pixels are
presented. If Enable is selected, the imager crops the image to the pixel addresses set in Crop to Pixel Addresses
on page 7-14.
*Enable Snapshot Aiming Pattern
(01h)
Disable Snapshot Aiming Pattern
(00h)
Enable Image Cropping
(01h)
*Disable Image Cropping
(Use Full 640 x 480 Pixels)
(00h)