Symbologies 11 - 79

Transmit Macro PDF Control Header

Parameter # B8h

When enabled, this activates transmission of the control header, which contains the segment index and the file ID,
in Macro PDF symbols. For example, the field may be: \92800000\725\120\343. The five digits after the \928 are
the segment index (or block index), and \725\120\343 is the file ID.
Enable this when selecting Transmit Any Symbol in Set / No Particular Order for the Macro PDF Transmit / Decode
Mode Symbols on page 11-78, and disable this when selecting Buffer All Symbols / Transmit Macro PDF When
Complete. This parameter has no effect when Passthrough All Symbols is selected.

Escape Characters

Parameter # E9h

This enables the backslash (\) character as an Escape character for systems that can process transmissions
containing special data sequences. Capture a bar code below to either format special data according to the GLI
(Global Label Identifier) protocol, or to disable this parameter. This parameter only affects the data portion of a
Macro PDF symbol transmission; the Macro PDF Control Header (if enabled) is always sent with GLI formatting.
Enable Macro PDF Control Header Transmit
(01h)
*Disable Macro PDF Control Header Transmit
(00h)
GLI Protocol
(02h)
*None
(00h)