2 - 2 Symbol MS4404/MS4407 Integration Guide

Mounting
There are two mounting holes (threaded inserts) on the bottom of the Symbol MS440X chassis.
The following figures provide mounting dimensions for the MiniScan housings. For a mounting template, see
Chapter 13, Mounting Template.

Symbol MS440X Mounting Dimensions

Figure 2-1
Symbol MS440X Mounting Dimensions
NOTE Use only non-magnetic M3x.5 screws with a maximum length of 3.6mm to mount the MiniScan imager
chassis.
Exit Window
Note: Dimensions are
in inches [mm]