MT 1500 Model 1.5 33
Common Radio Features
Conventional Scan Only
Make a Dynamic Priority Change
While the radio is scanning, the dynamic priority change feature lets
you temporarily change any channel in a scan list (except the
priority-one channel) to the priority-two channel. The replaced
priority-two channel becomes a non-priority channel. This change
remains in effect until scan is turned off, then scanning reverts back
to the preprogrammed state.
1When the radio is locked
onto the channel to be
designated as priority-two,
press the preprogrammed
Dynamic Priority button.
Note: The priority-one channel
cannot be changed to
priority-two.
2The radio continues
scanning the remaining
channels in the list. To
resume scanning the
preprogrammed priority-two
channel, you must leave and
re-enter scan operation.
MT1500 1.5 UG.book Page 33 Thursday, May 8, 2008 11:17 AM