![](/images/new-backgrounds/1301751/30175153x1.webp)
General Radio Operation
Universal Connector Cover
The universal connector cover is located on the antenna side of the radio. It is used to connect certain accessories to the radio.
Note: To prevent damage to the connector, shield it with the connector cover when not in use.
Remove the Connector Cover
1Insert a
screwdriver into the area between the bottom of the cover and the slot below the connector.
2Hold the top of the cover with your thumb while you pry the bottom of the cover away from the radio with the screwdriver.
Attach the Connector Cover
1Insert the hooked end of the cover into the top of the connector. Press downward on the cover’s top to seat it into the slot.
2Press the cover’s lower tab below the connector until it snaps in place.
Top Top Hooked End Slot
Bottom
Hooked End
Bottom
Slot
MT 1500 Model 1.5 | 15 |