Motorola PR400 manual Escalert, SET Squelch Level, SET Power Level, Option Board ON/OFF

GETTING STARTED

Non-VOX Headset with In-Line PTT

1To enable the headset sidetone, turn off your radio.

2Connect the non-VOX accessory to your radio.

3Press and hold the In-line PTT on your headset.

4Turn the radio on and release the PTT once the radio has completed start-up. During transmit, you will hear your voice through the headset while you speak.

5To disable the headset sidetone, turn off your radio and turn the radio on again.

ESCALERT

(CONVENTIONAL OPERATION ONLY)

You can program your radio to increase the volume of the alarm tones when a radio call is not answered.

Press the preprogrammed Escalert button to toggle between On and Off (see page 17).

24

SET SQUELCH LEVEL

Use this feature to filter out (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desirable.

Press the preprogrammed Squelch button (see page 17) to toggle between tight and normal squelch.

SET POWER LEVEL

Each channel/talkgroup in your radio has a predefined transmit power level that can be changed.

To set the power level, press the preprogrammed Power Level button (see page 17) to toggle between low and high power.

OPTION BOARD ON/OFF

Use this feature to enable or disable an option board.

Press the preprogrammed Option Board button (see page 17) to enable/disable the option board.

English