SCAN
STOP AUTO SCAN
Select a channel/talkgroup that has not been preprogrammed for Auto Scan by your dealer/ programmer.
DELETE A NUISANCE CHANNEL/ TALKGROUP
Note: Your dealer/programmer must preprogram a button to access this feature (see page 18).
If a channel/talkgroup continually generates unwanted calls or noise (a “nuisance” channel/ talkgroup), you can temporarily remove it from the scan list:
1While the radio is on the nuisance channel/ talkgroup, press the preprogrammed Nuisance Channel Delete button until you hear a tone.
2Release the Nuisance Channel Delete button. The nuisance channel/talkgroup is deleted.
28
Note:You cannot temporarily delete the channel/talkgroup that has been preprogrammed by your dealer/ programmer as your designated scan channel/talkgroup, a priority channel/ talkgroup, or the last remaining channel/ talkgroup in the scan list.
Restore Channels/Talkgroups to the Scan List
Power off the radio. Once the radio is powered on again, the deleted nuisance channels/ talkgroups are restored to the scan list.
– or –
1Press the preprogrammed Scan button to stop the scan.
2Press the preprogrammed Scan button again to start scanning. The deleted nuisance chan- nels/talkgroups are restored to the scan list.
–or –
Select a channel/talkgroup that has not been preprogrammed for scan by your dealer / programmer to stop Scan. Once you return to the original channel/talkgroup, the deleted nuisance channels/talkgroups are restored to the scan list.
English
